Black Friday Sale – Up to 40% Off
Black Friday Sale – Up to 40% Off
A house before and after installing Lumeva Lighting.
Each Track comes with 2 pieces:
TRACK A: A flat track for attaching to your soffits with screws.
TRACK B: A squared track that connects onto Track A with a simple snap. Track B is where you simply pop your GOVEE Lights into place at each hole opening.
Step 1: Identify where along your SOFFITS you would like to start installation.
Step 2: Measure HOW FAR FROM WALL you would like to install. We Recommend 2-3 inches from your wall. The farther you go, the more rounded the lights will be. We recommend using a chalk line to mark large areas so you don’t have to measure for each track.
Step 3: Place the end of TRACK A on the section of SOFFIT you would like to begin install. Use screws or nail gun to screw/nail the track into your Soffits.
*NOTE* Most homes have wood planks that protrude from the soffits. These tracks are specifically designed to overcome this problem. Make sure you are installing to top of these wood planks.
Step 4: Click your first Strand of lights into TRACK B before installing TRACK B. You should hear an audible “CLICK” sound, and the bulbs should slightly protrude through the hole openings on TRACK B.
Step 5: Simply snap TRACK B onto TRACK A .
Step 6: Repeat these steps along your entire roofline.
Ensure a Professional, Sleek, & No-Show Design for your Forever Lights!
Don’t settle for cheap 3D Printed Brackets meant to last 3 years for your Govee Outdoor Permanent Installation that is meant to last 20 years. Instead, hide all of the wires & secure your lights with Metal Channels that are sure to last the test of time.
Our SnapTrack® Aluminum Channels are…
• Perfect for hiding all wires & light pucks, only showing the bulb!
• Great for ensuring all lights point directly downwards towards the ground, ensuring the Elegant cone shape that Govee is known for.
• Cut to perfect length so that each hole is the perfect length for each bulb!
• Cuttable & Malleable! If You hit a corner, simply measure, mark, & cut using a simple saw to fit your needs!
DETAILS:
Each Govee Original Track is 2.7 Feet long, with 2 holes, and a spacing of 16 inches between each hole.
Each Govee Pro Track is 1 Meter long, with 2 holes, and a spacing of 20 inches between each hole.
Yes, they can be physically connected together because they share the same type of rigid linkers.
Note: Nanoleaf Blocks & Shapes do not share the same type of flex linkers. You can only connect them together using rigid linkers.
You can mount Nanoleaf Blocks Squares, Small Squares & Textured Squares with the included double sided mounting tape on any smooth and flat surface. Nanoleaf Blocks Light Pegboards & Shelves must be screw-mounted using the included screws.
Note: Tape is NOT suitable for ceiling installations or textured, porous, or popcorn surfaces (ie. wallpaper or brick walls). Because Nanoleaf Blocks are also heavier and thicker, we do not suggest mounting them onto the ceiling with adhesive tape.
The vision for Nanoleaf Blocks is to give users a different way to customise the wall. For accessories such as Shelves and Pegboard we needed to ensure better structural stability. Nanoleaf Blocks is designed with that structural mindset.
$452.80
$271.68
$452.80
$271.68
$452.80
$271.68
